Production _ Outcome

I have produced my final outcome which I think was successful.

The interaction of the boxes work efficiently and according to the infographic. The aesthetics of the box worked well against the boxes as it was unknow to the user what the senses where.

If I was to change anything it would have been the material of the boxes. I would have used acrylic still but possibly made it matt instead as when the plastic was removed from the boxes, the base instantly got scratched.

Production _ Updates

Infographic:

I have printed the infographic out.

To show how the sound works I have created a stand which allows the trigger to go off when the box is on it.

Sound + Stand:

Using four individual pieces of wood, of a 10×10 scale, I glued them together. I then painted it black to fit the colour of the boxes.

Sound:

I have managed to get the sound working. When the box is on the trigger and then lifted it makes a noise.

I’ve combined the Arduino and the wood prototype I made through a video to show how it works. It worked successfully.

Production _ Sound .02

Previously I was able to get the sound working using an Sparkfun MP3 Trigger. At the moment when the trigger is pressed it makes a sound. For my boxes to work, it needs to do the opposite. When the boxes are laid onto the trigger and when the the user picks up the boxes the sound plays.

I went to CTL to find out how to change this. They mentioned using an Arduino to do this change.

Setting it up:

Throughout my projects, I haven’t used Arduino so I was unsure about how to produce the code, luckily I was able to get help in this. Unfortunately, there were some technical issues which the technicians were not able to figure out. But we plan to get this sorted tomorrow.

Other updates:

I have not been able to come up with an idea for taste but I plan to have that complete for the exhibiton. I have had some thoughts, such as sweet/sourness of a type of data.

I am yet to print out my infographic but it will be on poster card.

Through the creation of the boxes, the lids have become scratched due to wear and tare which efftecs the overall look of the boxes. For the submission I will tape these down but they will be laser cut for the exhbition.

Production _ Lids + Smell .03

Laser cutting of lids:

Using the nets I created yesterday I got the lids laser cut/engraved. I am extremely happy with how they turned out, better than I expected. I was able to get the dimensions exactly to the size of the text and the smell was well sized a proportioned to the whole box.

Smell:

Smell represent the level of energy consumption in each city.

  • London: 309 billion kwh
  • Tokyo: – 64 billion tons
  • New Delhi: 114 billion kwh
  • Addis Ababa: 9 billion kwh

To produce the smell I have chosen to use coffee as it is a source of energy and works well when making the different intensity of scents.

Coffee ratio: 1 tsp spoon = 20,000 kWh

  • London: 15.5
  • Tokyo: 3
  • New Delhi: 6
  • Addis Ababa: 1/2

Water ratio: 1 : 2

  • London: 30ml
  • Tokyo: 6ml
  • New Delhi: 12 ml
  • Addis Ababa: 1 ml

In terms of adding the smell, I have bought a packet of 30ml dropper bottles which I can pour into each hole. This will not only for easy access in adding more of the sent but allows me to glue the lid down onto the box.

I tried representing these measurements but it was too difficult for the water to keep it in a liquid state due to the amount of coffee that needed to be added. Each bottle that will hold the coffee is 30ml, instead I will take that amound and added the right amount of coffee to this.

In regards to the material, I have changed it from foam to makeup sponges.

I wanted there to be some thickness to the sponge so that it could take a lot of the smell but I couldnt find anything like this. It also didnt help that the sponge was white, it needed to be black.

However I was still having problems with the time took to soak up the water. I tried to find alternative ways to findouther materials that would soak up the water better. I decided to try a washing up sponge. I tested how fast it would take for the water would soak in, and the washing up sponge worked instantly, compared to the makeup sponge which the water just layed there.

The washing up sponge was the best to go with.

The sponges were large squares so I cut them down according to the size of the circle. I reprinted the nets to figure out the sizes and made sure to add at least 2cm to each size. I made sure to leave a border which gave more surface area, it also allowed for enough space to glue them down without them running into the holes.

Production: Lids + Smell .02

I went back to the drawing board and decided to make up some more designs for the lids of the boxes.

I chose to enlarge everything and look at different placements using the same elements of the first prototype. I still wasn’t too happy with how large the circles were so still keeping a circle form I decided to use smaller circles in a repeated pattern.

To this new design, I have enlarged the cities to a larger size so that it fills the width of the lid. I have produced a new design for the smell, rather than three circles I have created a repeated pattern which I think looks better in terms of aesthetics. To this pattern, I have added a circle around it to signify that there is a sense there – the inforgraphic states this too.

To test this and see what it looks like physically, I printed it to check proportions.

They looked good and were ready to get cut. I plan to get the letters and large circle engraved into the acrylic and the smaller circles laser cut.

Production _ Lids + Smell

Previously one face of the box was going to have the city, country named as well as an illustration of it as a map. These were going to be vinyl transfered onto one face, however, I realised this wasn’t going to work.

As I had planned to get them printed and transferred on to vinyl, transferring them properly on to the box would have been extremely difficult, especially the individual sections of the map. It also did not help that all the boxes were glued together, so it restricted me from engraving any and I needed to apply a design to the box that would allow for the smell.

The lids of the box still needed to be made, which meant my only option was to apply these designs on to that and move the weight to a different face inside of the box. I was very lucky that the movement of modelling clay was very easy as if I added cement I would have had to start from scratch. With this being said, I needed to design an additional element of smell into the lid of the box. I wanted it to be placed, again to the top face of the box but ultimately couldn’t be able to do this because of the faces being stuck together.

Designs:

After receiving feedback, a suggestion was to remove the map of the country as it wasn’t nessessary to have this and looked better without this, I agreed.

It was an advantage to removing the map as I was able to add different elements, in this case smell. I decided to add three circles to the top right of the box next to the letters

I kept all the sizes of the circles the same size across all four boxes.

Laser cutting:

I got the nets laser cut.

I decided to test how the smell would work with is. I bought some black foam and cut it and attached it to the back of the lid.

Unexpectedly applying the foam did not work and the glue ran through the circles which ruined the front of the lid. Also, the surface area was too small which most likely was the cause of this. As for the foam, I will need to buy something or cut it into a cube or a circle so that there is enough space to glue it down and evenly distribute the smell. I am yet to decided what smell I will be using.

Overall, I wasn’t happy with the outcome, the circles are too small it looked very cramped which affected the overall look of the lid. Keeping all the circles the same size doesn’t work as it throws the proportions off, especially on the New Dehli box and getting any smell through a very small area may be too difficult. Also, some the boxes where not draw up to the correct size so it did not fit the box correctly.

I learnt a lot throughout this stage of production through prototyping and understanding how important layout is.

Production _ Sound

Sound:

Sound relates to the rise of sea levels in each city.

  • London: 11 m
  • Tokyo: 40 m
  • New Delhi: 216 m
  • Addis Ababa: 2.5 m

To produce the sound I changed the pitch to represent how bad it is. I used Audition to manipulate the sound. I extended the sound by repetiting the pings to 1 minute

I found it extremely difficult to use the data accurately to the level of pitch. I decided to apply the effect myself by keeping the data in mind but manually moving the pitch.

I would like the sound to work by lifting each box which will trigger the sound to play. I visited CTL to gather/ find out what materials are needed to make this.

Sound:

I took the audio and transferred it onto the micro SD card and into the Sparkfun

Components:

  • Sparkfun MP3 Trigger
  • Audio
  • Trigger
  • Crocodile clips
  • Wires
  • SD card
  • Plug

Putting it together

Testing:

I was able to get it working, however, it did the opposite trigger that it needed to be. I also realised that having the sound on a loop for one minute was too long, I have reduced this by 20 seconds. At the moment when the trigger is down, it makes the sound. The boxes to be resting down on the trigger and when the box is picked up it should make the sound. I will need to seek some help from CTL to sort this out. Once this has been figured out, I will get more equipment, like triggers to produce more than one sound.